![]() The details of the RAM modules may be readable on a label attached to the DIMM, but you can also identify them by the location of the notch, as seen in this illustration. This will involve removing them from their slots, so only do this if you are comfortable with the process. In addition, the system won't be able to use Dual-Channel architecture and your CPU-Z program will display Channel as Single, not Dual. Thus, it will not be optimal for the DDR3-1600 MHz RAM. The final way to determine which type of RAM your computer has is to physically inspect the memory modules. So if you install a, say DDR3-1033 MHz RAM beside your DDR3-1600 MHz RAM, the bus will adjust to the 1033 MHz one. The specific key is usually shown on-screen just as the computer starts, but it will also be in the motherboard manual. For example, you many have to repeatedly tap the Delete key or perhaps F12 to enter the BIOS. It’s usually a simple key press right after the computer powers on. Tried using just the new sticks in slots 2&4. CPU-Z also sees all 4 of the sticks and reports 32G. Bought 2 more of the exact same Crucial ram sticks and plugged them into slots 2&4. The method for entering the BIOS differs between computers. CPU-Z sees 32GB ram, Windows 10 sees 16 I've had two 8 gig sticks in slots 1&3 for some time. This typically includes the generation of DDR you’re using, what size each module is and the speed at which it operates. The computer BIOS will usually have a section for memory, which should show you details about the installed RAM. ![]() Regardless of what operating system your PC uses, you can often get information on what type of RAM your system uses before you even boot into it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |